Wash your hands thoroughly

Use the prep pad to wipe away oil, water, and any other moisture.

Note: Sweat, oils, creams and any other moisture present on your natural nails will reduce nail strip adhesion.

Select the strip that best fits the size of your nail and peel off transparent film sheet.

Note: Check markings on the sheet to confirm which sides of the strip should be facing the cuticle and free edge.

Apply strip to nail, leaving a hairline space between the strip and cuticle.

Press and smooth the strip firmly onto nail, applying extra pressure to the area along the free edge to secure. This will help prevent any snagging and extend the life of your manicure or pedicure.

Use the enclosed file to file away any excess or leftover strip.

Note: Be sure to file in one direction (up down or diagonally from top) to minimise damage to the strip.

○ Tear off excess strip with your fingernails


○ Rub excess strip off on a hard surface


○ Clip off excess strip using nail clippers or nail scissors

Note: Don't clip too close to the free edge. You can easily file off smaller amounts of excess material.

Use enclosed wooden nail stick to smooth strip along edges and sides of nail once more before curing.

Cure strips under the ohora gel lamp for 45-60 seconds.

Note: Curing time will vary with each design. Designs with thicker gel, nail gems or nail decals will require longer curing time.

Check to see if your strips have cured completely.

Completely cured gel will have hardend and sealed in place to the nail. Complete curing will boost the gloss and durability of the strips.



Use the enclosed file again to smooth out the edge of nails to finish.